Important Info

Featured Sponsor

Become an Author

GeoPrac.net is a community site, we are only as good as the content our members contribute! Whether it's a one time contribution, or a monthly or quarterly article, please consider becoming an author!

Latest Comments in...

San Francisco Millennium Tower Has Settled 16 Inches
Misrepresents actual foundation geometry. Photos show deep excavation to ne
New FHWA Soil Nail Manual Addresses LRFD, Hollow Bars
Good evening from Barcelona, Spain. I am witting to you because of I am le
Engineering Geologists vs Geological Engineers vs Geotechnic
Geological engineer from Spain (looking for job smiley geoengineer.martin@gmail
A Whole Lotta Shakin' Goin' On: Center for Geotechnical Mode
Randy, While the UC Davis lab is impressive I believe the USACE Centrifuge
Content
Kansas City Company Uses US Product, TerraThane, to Keep Natural Gas Flowing in Nation’s Ninth Largest Gas Reserve PDF Print E-mail
Written by Randy Post   
Friday, 14 April 2017 08:21

TerraThane geotechnical polyurethane saves slab at hydraulic fracturing stationFORT LUPTON, CO—An unfortunate inlet line break at one of Anadarko Petroleum's hydraulic fracturing stations in Weld County, Colorado just north of Denver, allowed injection fluid to wash out the end of the pumping station and get beneath the concrete slab foundation causing erosion. The voids created beneath the slabs were from three inches to five inches and left the slab floor uneven. The general contractor for the station, Open Range Services, initially thought to use the legacy method of mudjacking, or pressure grouting: pouring a thick grout of mixed concrete and other aggregates into the void, or backfill, but the "mud" is heavy which can affect the surrounding soil, time consuming, and difficult to apply and clean, and backfilling would have required the costly process of ripping out the slab and replacing it. Instead, they contacted Pro Foundation Technology, based in Kansas City, MO, to learn more about a contemporary technology called "foamjacking" or "polyjacking," which uses lighter weightgeotechnical polyurethane foam instead of grout.

"It's a far superior method," says Steve Walker, general foreman for Pro Foundation. "Mudjacking means you drill large holes in the slab, mix the mud or grout onsite, and pump it using large hoses into the holes in the slab. It's dirty, invasive, and time consuming. Geotechnical polyurethane foam is much lighter—four pounds per cubic yard, versus 120 pounds or more using mud—simpler, cleaner to use, and much less expensive. We pump a two part liquid system from a truck or pull behind rig through a narrow hose into a gun used to inject the unique geotechnical foam beneath the slab to fill any and all voids. The foam expands, completely fills the empty space, raises the slab to level then cures in place to become highly durable and monolithic with the surrounding soil. In other words, it helps prevent future erosion at that site."

Walker says they use a product called TerraThane, by the American owned company, NCFI Polyurethanes. "We used radar equipment to locate the voids, drilled small five-eighths inch holes in the slab, injected the TerraThane, leveled the slab, and it took us no time to clean up. Seven hours of polyjacking versus weeks or months using mudjacking or heavy backfill—do the math. It's way more efficient than the old stuff. TerraThane is ideal for this kind of slab repair."

Walker says Open Range was extremely pleased with the TerraThane solution. "They said they knew who to call if it happened again."

The hydraulic fracturing station is one of six owned by Anadarko within the Wattenberg Gas Field, which stretches from Denver to Greely, CO. According to the Colorado Oil and Gas Commission, in January, 2016 the field produced more than 1.55 billion cubic feet of gas and 239,000 barrels of oil per day making it the ninth largest gas reserves in the US.

###

For more information or to arrange an interview on this subject contact:
Dale McGlothlin, (202) 341-8615

ABOUT NCFI

Celebrating 50 years of foam. NCFI, headquartered in Mt. Airy, NC since 1964, manufactures polyurethane foam chemical systems for spray foam-in-place insulation (SPF), geotechnical, agricultural, roofing, marine floatation, packaging, specialty molding, and many other uses. The company also offers a complete line of flexible foams for furniture seating, transportation seating, bedding, carpet underlay, and packaging. NCFI also has manufacturing plants in Hickory, N.C., Dalton, GA., and Salt Lake City, UT. NCFI belongs to the Barnhardt Manufacturing Company, Inc. family of companies. To learn more about NCFI please visit www.NCFI.com

[Editor] NCFI is a sponsor of GeoPrac.net [/Editor]

Hits: 745
Trackback(0)
Comments (0)add comment

Write comment

security image
Write the displayed characters


busy
Possibly Related News Items (Automagically Generated)